HowTune

1980 Buick Regal Recalls

  1. Recall Description

    REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.

    Possible Effects

    Action

    THE DEALER WILL INSPECT THE REAR AXLE TO DETERMINE WHETHER IT WAS MANUFACTURED AT THE BUFFALO PLANT. IF SO, THEY WILL MAKE AXLE MEASUREMENTS AND IF NECESSARY REPLACE OR MODIFY AFFECTED AXLE COMPONENTS WITHOUT CHARGE.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.SYSTEM: POWER TRAIN; REAR AXLE.CONSEQUENCES OF DEFECT: LOSS OF THE WHEEL ASSEMBLY COULD LEAD TO LOSS OFVEHICLE CONTROL AND AN ACCIDENT.

    Recall Manufacture Dates

    1977-08-01 - 1980-07-01

    Vehicles Affected

    3100000
  2. Recall Description

    EXCESSIVE ENLARGEMENT OF THE WHEEL CYLINDER PILOT HOLE IN THE REAR BRAKE BACKING PLATE COULD ALLOW THE WHEEL CYLINDER TO ROTATE AND CAUSE LOSS OF BRAKE FLUID. CONSEQUENCE OF DEFECT: A LOSS OF BRAKE FLUID LEADS TO LOSS OF REAR BRAKE ACTION, CREATING THE POTENTIAL FOR AN ACCIDENT. FRONT BRAKES WOULD REMAIN OPERATIONAL.

    Possible Effects

    Action

    ADD A PART TO PREVENT WHEEL CYLINDER FROM ROTATING.

    Notes

    NOTE: OWNER NOTIFICATION WILL BEGIN AFTER SEPTEMBER 1, 1985 AND SHOULD BE COMPLETED BY SEPTEMBER 30, 1985.VEHICLE DESCRIPTION: MIDSIZE PASSENGER CARS AND SMALL TRUCKS. SYSTEM: REAR BRAKES.

    Recall Manufacture Dates

    -

    Vehicles Affected

    1810000
  3. Recall Description

    THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH CLEAR LAMP BULBS INSTEAD OF THE CORRECT AMBER BULBS IN FRONT PARK AND TURN SIGNAL LOCATIONS. AS A RESULT, THESE VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES AND ASSOCIATED EQUIPMENT".

    Possible Effects

    Action

    DEALER WILL INSPECT AND, IF NECESSARY, REPLACE CLEAR PARK AND TURN SIGNAL LAMP BULBS WITH AMBER BULBS AT NO COST TO OWNER.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: LIGHTING AND COMMUNICATIONS; TURN SIGNAL LAMPS.CONSEQUENCES OF DEFECT: THE FRONT PARK AND TURN SIGNALS APPEAR WHITE INSTEAD OFAMBER WHEN ILLUMINATED. THIS WOULD ADVERSELY AFFECT THE SAFE OPERATION OF THEVEHICLE AND COULD CONTRIBUTE TO A VEHICLE ACCIDENT.

    Recall Manufacture Dates

    -

    Vehicles Affected

    9
  4. Recall Description

    THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.

    Possible Effects

    Action

    BOTH REAR CONTROL ARM ATTACHMENT BOLTS WILL BE REPLACED WITHOUT CHARGE.

    Notes

    SYSTEM: SUSPENSION; REAR CONTROL ARM ATTACHING BOLTS.VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.CONSEQUENCES OF DEFECT: IF THE FRACTURE OCCURS WHEN THE VEHICLE IS IN MOTION,IT COULD RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

    Recall Manufacture Dates

    1977-08-01 - 1980-12-01

    Vehicles Affected

    5821160
  5. Recall Description

    THE BOLTS THAT ATTACHED THE REAR SUSPENSION CONTROL ARMS TO THE FRAME AND AXLE MAY BE DEFECTIVE AND THE BOLT HEAD MAY SEPARATE FROM THE BOLT SHANK. THIS COULD ALLOW THE CONTROL ARM TO COME LOOSE.

    Possible Effects

    Action

    THE DEALER WILL REPLACE ALL SUSPECT REAR SUSPENSION CONTROL ARM BOLTS PRIOR TO DELIVERY. THIS WILL BE DONE FREE OF CHARGE.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SUSPENSION; BOLTS.CONSEQUENCES OF DEFECT: IF THIS CONDITION OCCURS DURING VEHICLE OPERATION, LOSSOF VEHICLE CONTROL AND AN ACCIDENT COULD RESULT.

    Recall Manufacture Dates

    1979-08-01 - 1979-08-01

    Vehicles Affected

    227
  6. Recall Description

    CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

    Possible Effects

    THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.

    Action

    HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.

    Notes

    CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION''S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

    Recall Manufacture Dates

    -

    Vehicles Affected

    121680