HowTune

1980 Subaru Subaru Recalls

  1. Recall Description

    A PROTECTIVE BOOT COVERING THE STEERING RACK AND PINION SHAFT CAN COME LOOSE IN EXTREME COLD. WHEN UNPROTECTED, THE RACK SHAFT MAY CORRODE, RESULTING IN HARD OR STIFF STEERING.

    Possible Effects

    Action

    SECURING CLIPS WILL BE INSTALLED ON PROTECTIVE BOOT COVERS AND AFFECTED STEERING RACK SHAFTS WILL BE REPAIRED OR REPLACED, IF NECESSARY.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES; ALL MODELS OTHER THAN BRAT.SYSTEM: STEERING; RACK AND PINION SHAFT BOOT.CONSEQUENCES OF DEFECT: STEERING MALFUNCTION COULD LEAD TO A VEHICLE ACCIDENTAND PERSONAL INJURY.NOTE: SEIZURE MAY OCCUR WITH CONTINUED OPERATION, WHEN THE STEERING WHEEL ISTURNED FULLY OR NEARLY SO IN EITHER DIRECTION.

    Recall Manufacture Dates

    1979-08-01 - 1980-03-01

    Vehicles Affected

    75284
  2. Recall Description

    THE INTERNAL SEATBACK FRAME STRUCTURE MAY BREAK AND SEPARATE FROM THE SEAT.

    Possible Effects

    Action

    THE DRIVER"S SEATBACK FRAME WILL BE REPLACED WITH A MODIFIED SEATBACK FRAME AT NO CHARGE. THE UPHOLSTERY MATERIAL AND ANY REPAIRS TO THE OTHER SEATS ARE NOT INCLUDED.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: INTERIOR SYSTEMS; SEATBACKS.CONSEQUENCES OF DEFECT: THIS SEPARATION OR BREAKAGE CAN RESULT IN TWISTING ORREARWARD LEANING OF THE SEATBACK THUS POTENTIALLY REDUCING THE SUPPORT TO THEDRIVERS UPPER TORSO. IF THE SEPARATION OCCURS WHILE THE VEHICLE IS IN MOTION,THE DRIVER MAY LOSE CONTROL OR VISIBILITY, AND AN ACCIDENT MAY RESULT.

    Recall Manufacture Dates

    1979-08-01 - 1980-03-01

    Vehicles Affected

    84253
  3. Recall Description

    THE DEFECT INVOLVES THE 25 AMP HEADLIGHT FUSE HOLDER. THERE MAY BE EXCESSIVE ELECTRICAL RESISTANCE CAUSED BY THE LOOSENESS OF THE RIVET HOLDING THE FUSE HOLDER TO THE TERMINAL PLATE. EXCESS RESISTANCE MAY CAUSE THE SOLDERED END OF THE FUSE TO MELT. AN OPEN CIRCUIT COULD OCCUR AND THE HEADLIGHTS WOULD NOT OPERATE.

    Possible Effects

    Action

    DEALER WILL REPLACE THE HEADLIGHT FUSE HOLDER WITH AN INLINE FUEL HARNESS KIT.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: LIGHTING AND COMMUNICATIONS; HEADLAMP FUSE HOLDER.CONSEQUENCES OF DEFECT: HEADLIGHTS MAY SUDDENLY GO OUT. IF THE LIGHT FAILUREWERE TO OCCUR AT NIGHT WHILE VEHICLE IS IN MOTION, A VEHICLE CRASH COULDPOSSIBLY RESULT.

    Recall Manufacture Dates

    1979-08-01 - 1981-03-01

    Vehicles Affected

    230041
  4. Recall Description

    WHEN WIPER BLADES ARE FROZEN TO THE WINDSHIELD AND THE WIPER MOTOR IS TURNED ON, THE RIGHT-HAND WIPER PIVOT MAY BECOME BENT. THE PLASTIC BEARING, WHICH IS A SNAP-ON DEVICE FITTING OVER THE BALL JOINT ON THE DRIVE MOTOR, MAY PULL OFF THE BALL, DISENGAGING THE WIPER SYSTEM, MAKING BOTH WIPERS INOPERATIVE.

    Possible Effects

    Action

    DEALER WILL INSTALL A NEWLY DESIGNED MASTER LINK IN THE WINDSHIELD WIPER SYSTEM WITHOUT CHARGE TO OWNER.

    Notes

    VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: VISUAL; WINDSHIELD WIPER.CONSEQUENCES OF DEFECT: THE LACK OF FUNCTIONING WIPERS WOULD IMPAIR VISIBILITYIN ADVERSE WEATHER CONDITIONS AND AN ACCIDENT COULD RESULT.

    Recall Manufacture Dates

    1979-09-01 - 1980-02-01

    Vehicles Affected

    71683