HowTune

1988 Hyundai Excel Recalls

  1. Recall Description

    THE HEATER CONTROL VALVE STEM DOES NOT MEET THE MATERIAL SPECIFICATIONS. HIGH COOLANT TEMPERATURES CAN CAUSE THE STEM TO LEAK.

    Possible Effects

    THIS CAN RESULT IN A BURN INJURY TO THE FRONT SEAT PASSENGER''S FEET AND LEGS.

    Action

    DEALERS WILL INSPECT AND REPLACE DEFECTIVE VALVE STEMS.

    Notes

    SYSTEM: HEATER, WATER, DEFROSTER, HEATER CORE.VEHICLE DESCRIPTION: PASSENGER CARS.OTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, PLEASE CONTACT HYUNDAI AT 1-800-829-9956. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION''S AUTO SAFETY HOTLINE AT 1-800-424-9393.

    Recall Manufacture Dates

    1988-04-01 - 1989-02-01

    Vehicles Affected

    270000
  2. Recall Description

    THE MANUAL TRANSMISSIONS MAY LOCK UP FROM INSUFFICIENT LUBRICATION OF THE GEARS IN THE TRANSMISSION CASE. THIS CAN CAUSE THE DRIVE WHEELS TO SEIZE AND THE VEHICLE TO COME TO A SUDDEN STOP.

    Possible Effects

    SUDDEN STOPS WITHOUT PRIOR WARNING CAN CAUSE VEHICLEOCCUPANTS TO BE THROWN AROUND IN THE CAR, AND CAUSE LOSS OF VEHICLE CONTROLWHICH COULD RESULT IN AN ACCIDENT.

    Action

    HYUNDAI WILL PERFORM A COST FREE TRANSMISSION OIL CHANGE.

    Notes

    SYSTEM: POWER TRAIN; TRANSMISSION; STANDARD; MANUAL.VEHICLE DESCRIPTION: PASSENGER CARS EQUIPPED WITH MANUAL 4 OR 5 SPEEDTRANSMISSIONS.

    Recall Manufacture Dates

    -

    Vehicles Affected

    515000
  3. Recall Description

    DETERIORATION OF THE REED VALVE SUBASSEMBLY MAY LEAD TO A MALFUNCTION WITHIN THE SECONDARY AIR SUPPLY PORTION OF THE EMISSION CONTROL SYSTEM. THE SCREWS WHICH ATTACH THE REEDS TO THE REED VALVE SUBASSEMBLY MAY RUST, AND IF THE RUSTING BECOMES SEVERE, THE SCREW HEADS WILL ERODE AND ALLOW THE REEDS TO SEPARATE FROM THE REED VALVE SUBASSEMBLY. CORROSION MAY ALSO OCCUR ON THE REED VALVE SUBASSEMBLY, DEFORMING THE REED SEATS AND PREVENTING THE REEDS FROM CLOSING PROPERLY. SEPARATION OF THE REEDS FROM THE REED VALVE SUBASSEMBLY OR IMPROPER CLOSING OF THE REEDS ALLOW HOT EXHAUST GASES TO FLOW BACKWARD INTO THE PLASTIC SECONDARY AIR FILTER CASE WHEN THE VEHICLE IS BEING DRIVEN. THESE HOT EXHAUST GASES MAY MELT THE SECONDARY PLASTIC AIR FILTER CASE.

    Possible Effects

    THE MELTING PLASTIC AIR FILTER CASE MAY LEAD TO A FIREIN THE ENGINE COMPARTMENT.

    Action

    REPLACE THE REED VALVE SUBASSEMBLY WITH ONE WHOSE METAL COMPONENTS ARE FABRICATED FROM CORROSION RESISTANT STAINLESS STEEL.

    Notes

    SYSTEM: EXHAUST SYSTEM.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: HYUNDAI MOTOR COMPANY WILL BE PERFORMING THIS RECALL FOR THE HYUNDAIEXCEL AND FOR THE MITSUBISHI PRECIS.

    Recall Manufacture Dates

    -

    Vehicles Affected

    895000
  4. Recall Description

    IF CRUISE CONTROL MAIN SWITCH IS IN THE ON POSITION WHEN ENGINE IS STARTED, SYSTEM CAN BE AFFECTED BY A SHORT DURATION VOLTAGE DROP CAUSED BY OPTIONAL HI-POWER (H340) RADIO.

    Possible Effects

    THIS COULD CAUSE ERRATIC CRUISE CONTROL OPERATION, WHICHCOULD RESULT IN AN ACCIDENT.

    Action

    REPLACE ELECTRONIC CONTROL MODULE.

    Notes

    SYSTEM:CRUISE CONTROL.VEHICLE DESCRIPTION:PASSENGER CARS WITH SPECIFIC CRUISE SYSTEMS (SCS).

    Recall Manufacture Dates

    1985-08-01 - 1989-06-01

    Vehicles Affected

    8550